Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Through Hole |
Package / Case |
Radial, Can |
Dielectric Material |
ALUMINUM |
Operating Temperature |
-55°C~105°C |
Packaging |
Tape & Box (TB) |
Published |
2015 |
Series |
PLF |
Size / Dimension |
0.315Dia 8.00mm |
Tolerance |
±20% |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
2 |
Termination |
Radial |
ECCN Code |
EAR99 |
Type |
Polymer |
Applications |
General Purpose |
HTS Code |
8532.22.00 |
Capacitance |
180μF |
Voltage - Rated DC |
16V |
Lead Pitch |
3.5mm |
ESR (Equivalent Series Resistance) |
9mOhm |
Polarity |
POLARIZED |
Lead Spacing |
0.138 3.50mm |
Lifetime @ Temp |
2000 Hrs @ 105°C |
Leakage Current |
576μA |
Ripple Current |
5A |
Ripple Current @ High Frequency |
5A @ 100kHz |
Diameter |
8mm |
Height Seated (Max) |
0.472 12.00mm |
Length |
12mm |
RoHS Status |
ROHS3 Compliant |
The capacitance can run at the range of 180μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to PLF series. This part is mounted in the way of Through Hole. The type of the PLF1C181MDO1TD capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PLF1C181MDO1TD is suitable to conduct the ripple current at 5A. PLF1C181MDO1TD Capacitor The typical values of Voltage - Rated DC are 16V. There are 2 terminals embeded in PLF1C181MDO1TD Capacitor. There are 576μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The dielectric materials are defined as ALUMINUM.
PLF Series
Capacitance: 180μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of PLF1C181MDO1TD Aluminum Polymer Capacitors.
Typically, PLF1C181MDO1TD is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Server motherboards
- Motor Start
- Spot Welding
- Frequency Converters
- Smoothing Noise Filtering
- Lighting Ballast
- PFC
- Bypassing Noise Filtering
- DC Link
- Coupling or blocking