PLF1D121MCL2TD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Box (TB) |
| Published | 2015 |
| Series | PLF |
| Size / Dimension | 0.394Dia 10.00mm |
| Tolerance | ±20% |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Radial |
| Type | Polymer |
| Applications | General Purpose |
| Capacitance | 120μF |
| Voltage - Rated DC | 20V |
| Lead Pitch | 5.0038mm |
| ESR (Equivalent Series Resistance) | 35mOhm |
| Polarity | Polar |
| Lead Spacing | 0.197 5.00mm |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Leakage Current | 480μA |
| Ripple Current | 2.8A |
| Life (Hours) | 2000 hours |
| Ripple Current @ High Frequency | 2.8A @ 100kHz |
| Height Seated (Max) | 0.394 10.00mm |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 120μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to PLF series. This part is mounted in the way of Through Hole. The type of the PLF1D121MCL2TD capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PLF1D121MCL2TD is suitable to conduct the ripple current at 2.8A. PLF1D121MCL2TD Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 20V. PLF1D121MCL2TD Capacitor. There are 480μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total.
PLF Series
Capacitance: 120μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of PLF1D121MCL2TD Aluminum Polymer Capacitors.
Typically, PLF1D121MCL2TD is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Motor Start
- Audio Crossover
- Spot Welding
- Voltage Doubling
- Lighting Ballast
- DC Buffering
- Flashtube Ignition
- Computer motherboards
- DC Link
- Motor Control
