PLF1D470MCL2
| Parameters | |
|---|---|
| Diameter | 8mm |
| Height | 7mm |
| Height Seated (Max) | 0.276 7.00mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Terminal Shape | WIRE |
| Operating Temperature | -55°C~105°C |
| Packaging | Bulk |
| Published | 2009 |
| Series | PLF |
| Size / Dimension | 0.315Dia 8.00mm |
| Tolerance | ±20% |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| Termination | Radial |
| ECCN Code | EAR99 |
| Type | Polymer |
| Terminal Finish | Silver (Ag) |
| Applications | General Purpose |
| HTS Code | 8532.22.00 |
| Capacitance | 47μF |
| Voltage - Rated DC | 20V |
| Lead Pitch | 3.5mm |
| ESR (Equivalent Series Resistance) | 45mOhm |
| Polarity | POLARIZED |
| Lead Spacing | 0.138 3.50mm |
| Lead Diameter | 600 μm |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Leakage Current | 0.188mA |
| Ripple Current | 2A |
| Life (Hours) | 2000 hours |
| Tan Delta | 0.12 |
| Ripple Current @ High Frequency | 2A @ 100kHz |
The capacitance can run at the range of 47μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to PLF series. This part is mounted in the way of Through Hole. The type of the PLF1D470MCL2 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PLF1D470MCL2 is suitable to conduct the ripple current at 2A. PLF1D470MCL2 Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 20V. There are 2 terminals embeded in PLF1D470MCL2 Capacitor. There are 0.188mA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total.
PLF Series
Capacitance: 47μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of PLF1D470MCL2 Aluminum Polymer Capacitors.
Typically, PLF1D470MCL2 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Decoupling Noise Filtering
- Smoothing Noise Filtering
- Coupling or blocking
- Power Line Buffering
- Bypassing Noise Filtering
- Signal decoupling & power bypass
- Power Factor Correction
- Motor Control
- Voltage Doubling
- Motor Start
