PLF1E100MCL2TD
| Parameters | |
|---|---|
| Ripple Current @ Low Frequency | 75mA @ 120Hz |
| Ripple Current @ High Frequency | 1.5A @ 100kHz |
| Height Seated (Max) | 0.295 7.50mm |
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Box (TB) |
| Series | PLF |
| Size / Dimension | 0.315Dia 8.00mm |
| Tolerance | ±20% |
| Part Status | Active |
| Type | Polymer |
| Applications | General Purpose |
| Voltage - Rated | 25V |
| Capacitance | 10μF |
| ESR (Equivalent Series Resistance) | 60mOhm |
| Lead Spacing | 0.138 3.50mm |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
The capacitance can run at the range of 10μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to PLF series. This part is mounted in the way of Through Hole. The type of the PLF1E100MCL2TD capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PLF1E100MCL2TD PLF1E100MCL2TD Capacitor PLF1E100MCL2TD Capacitor. Voltage - Rated often has values of 25V.
PLF Series
Capacitance: 10μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of PLF1E100MCL2TD Aluminum Polymer Capacitors.
Typically, PLF1E100MCL2TD is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Frequency Converters
- Lighting Ballast
- UPS Buffering
- Coupling or blocking
- To reduce power noise & signal noise
- DC Buffering
- Decoupling Noise Filtering
- Voltage Doubling
- Signal decoupling & power bypass
- Bypassing Noise Filtering
