Parameters |
Capacitance |
10μF |
Voltage - Rated DC |
25V |
Lead Pitch |
2.4892mm |
ESR (Equivalent Series Resistance) |
65mOhm |
Polarity |
Polar |
Lead Spacing |
0.098 2.50mm |
Lifetime @ Temp |
2000 Hrs @ 105°C |
Leakage Current |
125μA |
Ripple Current |
1.5A |
Life (Hours) |
2000 hours |
Ripple Current @ High Frequency |
1.5A @ 100kHz |
Height Seated (Max) |
0.236 6.00mm |
Length |
6mm |
RoHS Status |
ROHS3 Compliant |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
Radial, Can |
Operating Temperature |
-55°C~105°C |
Packaging |
Tape & Box (TB) |
Published |
2015 |
Series |
PLF |
Size / Dimension |
0.248Dia 6.30mm |
Tolerance |
±20% |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Termination |
Radial |
Type |
Polymer |
Max Operating Temperature |
105°C |
Min Operating Temperature |
-55°C |
Applications |
General Purpose |
Voltage - Rated |
25V |
The capacitance can run at the range of 10μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to PLF series. This part is mounted in the way of Through Hole. The type of the PLF1E100MCL7TP capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PLF1E100MCL7TP is suitable to conduct the ripple current at 1.5A. PLF1E100MCL7TP Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 25V. PLF1E100MCL7TP Capacitor. There are 125μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. Voltage - Rated often has values of 25V. This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C.
PLF Series
Capacitance: 10μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of PLF1E100MCL7TP Aluminum Polymer Capacitors.
Typically, PLF1E100MCL7TP is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Bypassing Noise Filtering
- Power Factor Correction
- DC Link
- To enhance power efficiency
- Power Line Buffering
- Flashtube Ignition
- Frequency Converters
- Audio Crossover
- Motor Start
- Lighting Ballast