PLF1E470MDO2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Terminal Shape | WIRE |
| Number of Pins | 2 |
| Dielectric Material | Aluminium |
| Operating Temperature | -55°C~105°C |
| Packaging | Bulk |
| Published | 2007 |
| Series | PLF |
| Size / Dimension | 0.394Dia 10.00mm |
| Tolerance | ±20% |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| Termination | Radial |
| ECCN Code | EAR99 |
| Type | Polymer |
| Terminal Finish | Silver (Ag) |
| Applications | General Purpose |
| Capacitance | 47μF |
| Voltage - Rated DC | 25V |
| Lead Pitch | 5mm |
| Lead Length | 19mm |
| ESR (Equivalent Series Resistance) | 30mOhm |
| Polarity | POLARIZED |
| Lead Spacing | 0.197 5.00mm |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Leakage Current | 0.588mA |
| Ripple Current | 3A |
| Life (Hours) | 2000 hours |
| Ripple Current @ High Frequency | 3A @ 100kHz |
| Diameter | 10mm |
| Height | 13mm |
| Height Seated (Max) | 0.512 13.00mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
The capacitance can run at the range of 47μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to PLF series. This part is mounted in the way of Through Hole. The type of the PLF1E470MDO2 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PLF1E470MDO2 is suitable to conduct the ripple current at 3A. PLF1E470MDO2 Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 25V. There are 2 terminals embeded in PLF1E470MDO2 Capacitor. There are 0.588mA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The dielectric materials are defined as Aluminium. There are 2 pins available in the part.
PLF Series
Capacitance: 47μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of PLF1E470MDO2 Aluminum Polymer Capacitors.
Typically, PLF1E470MDO2 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Smoothing Noise Filtering
- Coupling or blocking
- Bypassing Noise Filtering
- Motor Control
- Decoupling Noise Filtering
- Voltage Doubling
- Audio Crossover
- UPS Buffering
- Spot Welding
- To reduce power noise & signal noise
