PLL1707IDBQRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Generators |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.64mm |
| Base Part Number | PLL1707 |
| Output | CMOS |
| Pin Count | 20 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Number of Circuits | 1 |
| Nominal Supply Current | 35mA |
| uPs/uCs/Peripheral ICs Type | CLOCK GENERATOR, VIDEO |
| Frequency (Max) | 36.864MHz |
| Input | CMOS, Crystal |
| Ratio - Input:Output | 1:6 |
| Primary Clock/Crystal Frequency-Nom | 27MHz |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PLL1707IDBQRQ1 Overview
This clock IC is packaged using the Tape & Reel (TR) method. As part of the 20-SSOP (0.154, 3.90mm Width) package, this clock generator is embedded. This clock generator will sustain a maximum temperature of 260 when reflown. It contains a total of 20 terminations within RF synthesizer. This time clock generator should be voltaged at 3.3V. There is a Clock PLL called CMOS, Crystal which is designed to be the input to this clock generator. Using 1 circuits, the electronic part's full performance can be accessed. RF synthesizers based on this clock provide frequencies up to 36.864MHz maximum. The Surface Mount allows this electrical component to be easily installed on the panel. RF synthesizer incorporates CLOCK GENERATOR, VIDEO UPUs, PCs, and peripheral IC's. Clock generators should operate with the voltage supply of 2.7V~3.6V. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. In this case, we are dealing with a frequency synthesizer that can be used with CMOS logic levels. It is a 20-bit clock PLL designed specifically for microprocessors. According to the base part number PLL1707, its related parts can be found. There is an available 20 pin on the PLL. Clock PLL is capable of handling a voltage of 3.3V. Fundamentally, this is a kind of Clock Generators clock PLL. There are a number of electronic parts in the Automotive, AEC-Q100 series, including this one. I would like to briefly introduce you to a 2-element frequency synthesizer that performs well with low jitter.
PLL1707IDBQRQ1 Features
Available in the 20-SSOP (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
PLL1707IDBQRQ1 Applications
There are a lot of Texas Instruments PLL1707IDBQRQ1 Clock Generators applications.
- Mixed mode (analog and digital) applications
- Signal generator
- Clock signals to the high-speed Digital RF circuits
- Myriad digital applications
- Automatic test equipment
- Quenching?
- Walkie-talkies
- Peripheral devices
- Aerospace and defense
- FM demodulation networks for FM operations
