PLS0E821MCO6
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Terminal Shape | WIRE |
| Operating Temperature | -55°C~105°C |
| Packaging | Bulk |
| Published | 2009 |
| Series | PLS |
| Size / Dimension | 0.315Dia 8.00mm |
| Tolerance | ±20% |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| Termination | Radial |
| ECCN Code | EAR99 |
| Type | Polymer |
| Terminal Finish | Silver (Ag) |
| Applications | General Purpose |
| HTS Code | 8532.22.00 |
| Capacitance | 820μF |
| Voltage - Rated DC | 2.5V |
| Lead Pitch | 3.5mm |
| ESR (Equivalent Series Resistance) | 7mOhm |
| Polarity | Polar |
| Lead Spacing | 0.138 3.50mm |
| Lead Diameter | 600 μm |
| Voltage | 2.5V |
| Lifetime @ Temp | 5000 Hrs @ 105°C |
| Leakage Current | 410μA |
| Ripple Current | 5.2A |
| Life (Hours) | 5000 hours |
| Tan Delta | 0.08 |
| Ripple Current @ High Frequency | 5.2A @ 100kHz |
| Diameter | 8mm |
| Height | 9mm |
| Height Seated (Max) | 0.354 9.00mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
The capacitance can run at the range of 820μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to PLS series. This part is mounted in the way of Through Hole. The type of the PLS0E821MCO6 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PLS0E821MCO6 is suitable to conduct the ripple current at 5.2A. PLS0E821MCO6 Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 2.5V. There are 2 terminals embeded in PLS0E821MCO6 Capacitor. There are 410μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The voltage for the part is specified as 2.5V volts.
PLS Series
Capacitance: 820μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of PLS0E821MCO6 Aluminum Polymer Capacitors.
Typically, PLS0E821MCO6 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Motor Control
- DC/DC, DC/AC, and AC/AC converters
- Lighting Ballast
- Computer motherboards
- Decoupling Noise Filtering
- Spot Welding
- Power Factor Correction
- DC Link
- Voltage Doubling
- Frequency Converters
