banner_page

PLS0G681MDO1

PLS Series 680μF 4V Aluminum Polymer Capacitors ±20% Radial, Can Through Hole Bulk


  • Manufacturer: Nichicon
  • Nocochips NO: 555-PLS0G681MDO1
  • Package: Radial, Can
  • Datasheet: PDF
  • Stock: 949
  • Description: PLS Series 680μF 4V Aluminum Polymer Capacitors ±20% Radial, Can Through Hole Bulk (Kg)

Details

Tags

Parameters
RoHS Status ROHS3 Compliant
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case Radial, Can
Terminal Shape WIRE
Weight 949.99252mg
Operating Temperature -55°C~105°C
Packaging Bulk
Published 2009
Series PLS
Size / Dimension 0.315Dia 8.00mm
Tolerance ±20%
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 2
Termination Radial
ECCN Code EAR99
Type Polymer
Terminal Finish Silver (Ag)
Applications General Purpose
HTS Code 8532.22.00
Capacitance 680μF
Voltage - Rated DC 4V
Lead Pitch 3.5mm
ESR (Equivalent Series Resistance) 7mOhm
Polarity Polar
Lead Spacing 0.138 3.50mm
Lead Diameter 600 μm
Voltage 4V
Lifetime @ Temp 5000 Hrs @ 105°C
Leakage Current 544μA
Ripple Current 5.8A
Life (Hours) 5000 hours
Tan Delta 0.08
Ripple Current @ High Frequency 5.8A @ 100kHz
Diameter 8mm
Height 12mm
Height Seated (Max) 0.472 12.00mm
Radiation Hardening No

The capacitance can run at the range of 680μF.


±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to PLS series. This part is mounted in the way of Through Hole. The type of the PLS0G681MDO1 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PLS0G681MDO1 is suitable to conduct the ripple current at 5.8A. PLS0G681MDO1 Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 4V. There are 2 terminals embeded in PLS0G681MDO1 Capacitor. There are 544μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The voltage for the part is specified as 4V volts.

PLS Series


Capacitance: 680μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C

There are great quantities of applications of PLS0G681MDO1 Aluminum Polymer Capacitors.


Typically, PLS0G681MDO1 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.

  • Motor Start
  • Smoothing Noise Filtering
  • Flashtube Ignition
  • DC/DC, DC/AC, and AC/AC converters
  • Signal decoupling & power bypass
  • DC Link
  • UPS Buffering
  • To reduce power noise & signal noise
  • Audio Crossover
  • Spot Welding

Write a review

Note: HTML is not translated!
    Bad           Good