Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
Radial, Can |
Operating Temperature |
-55°C~105°C |
Packaging |
Tape & Box (TB) |
Published |
2015 |
Series |
PLS |
Size / Dimension |
0.248Dia 6.30mm |
Tolerance |
±20% |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Termination |
Radial |
Type |
Polymer |
Max Operating Temperature |
105°C |
Min Operating Temperature |
-55°C |
Applications |
General Purpose |
Voltage - Rated |
10V |
Capacitance |
150μF |
Voltage - Rated DC |
10V |
Lead Pitch |
2.4892mm |
ESR (Equivalent Series Resistance) |
20mOhm |
Polarity |
Polar |
Lead Spacing |
0.098 2.50mm |
Lifetime @ Temp |
5000 Hrs @ 105°C |
Leakage Current |
300μA |
Ripple Current |
3A |
Life (Hours) |
5000 hours |
Ripple Current @ High Frequency |
3A @ 100kHz |
Height Seated (Max) |
0.413 10.50mm |
Length |
10.5mm |
RoHS Status |
ROHS3 Compliant |
The capacitance can run at the range of 150μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to PLS series. This part is mounted in the way of Through Hole. The type of the PLS1A151MDL4TD capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PLS1A151MDL4TD is suitable to conduct the ripple current at 3A. PLS1A151MDL4TD Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 10V. PLS1A151MDL4TD Capacitor. There are 300μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. Voltage - Rated often has values of 10V. This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C.
PLS Series
Capacitance: 150μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of PLS1A151MDL4TD Aluminum Polymer Capacitors.
Typically, PLS1A151MDL4TD is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Voltage Doubling
- Computer motherboards
- Frequency Converters
- DC/DC, DC/AC, and AC/AC converters
- PFC
- UPS Buffering
- Signal decoupling & power bypass
- Smoothing Noise Filtering
- Power Factor Correction
- Lighting Ballast