PLV1E151MDL1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Terminal Shape | WIRE |
| Operating Temperature | -55°C~105°C |
| Packaging | Bulk |
| Published | 2015 |
| Series | PLV |
| Size / Dimension | 0.315Dia 8.00mm |
| Tolerance | ±20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| Termination | Radial |
| ECCN Code | EAR99 |
| Type | Polymer |
| Terminal Finish | Tin (Sn) |
| Applications | General Purpose |
| HTS Code | 8532.22.00 |
| Capacitance | 150μF |
| Voltage - Rated DC | 25V |
| Terminal Pitch | 3.5mm |
| Lead Pitch | 3.5052mm |
| ESR (Equivalent Series Resistance) | 26mOhm |
| Polarity | Polar |
| Lead Spacing | 0.138 3.50mm |
| Lifetime @ Temp | 3000 Hrs @ 105°C |
| Leakage Current | 750μA |
| Ripple Current | 2.4A |
| Life (Hours) | 3000 hours |
| Ripple Current @ High Frequency | 2.4A @ 100kHz |
| Dissipation Factor | 0.12 % |
| Diameter | 8mm |
| Height Seated (Max) | 0.472 12.00mm |
| Length | 12mm |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 150μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to PLV series. This part is mounted in the way of Through Hole. The type of the PLV1E151MDL1 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PLV1E151MDL1 is suitable to conduct the ripple current at 2.4A. PLV1E151MDL1 Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 25V. There are 2 terminals embeded in PLV1E151MDL1 Capacitor. There are 750μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total.
PLV Series
Capacitance: 150μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of PLV1E151MDL1 Aluminum Polymer Capacitors.
Typically, PLV1E151MDL1 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- DC Buffering
- Power Factor Correction
- Power Line Buffering
- PFC
- UPS Buffering
- Server motherboards
- DC/DC, DC/AC, and AC/AC converters
- Computer motherboards
- Audio Crossover
- Flashtube Ignition
