Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
Radial, Can |
Dielectric Material |
ALUMINUM |
Operating Temperature |
-55°C~105°C |
Packaging |
Tape & Box (TB) |
Published |
2009 |
Series |
PLV |
Size / Dimension |
0.315Dia 8.00mm |
Tolerance |
±20% |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
2 |
Termination |
Radial |
ECCN Code |
EAR99 |
Type |
Polymer |
Applications |
General Purpose |
HTS Code |
8532.22.00 |
Capacitance |
27μF |
Voltage - Rated DC |
63V |
Terminal Pitch |
3.5mm |
Lead Pitch |
3.5052mm |
ESR (Equivalent Series Resistance) |
33mOhm |
Polarity |
POLARIZED |
Lead Spacing |
0.138 3.50mm |
Lifetime @ Temp |
3000 Hrs @ 105°C |
Leakage Current |
340μA |
Ripple Current |
2.1A |
Life (Hours) |
3000 hours |
Ripple Current @ High Frequency |
2.1A @ 100kHz |
Dissipation Factor |
0.12 % |
Diameter |
8mm |
Height Seated (Max) |
0.472 12.00mm |
Length |
12mm |
RoHS Status |
ROHS3 Compliant |
The capacitance can run at the range of 27μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to PLV series. This part is mounted in the way of Through Hole. The type of the PLV1J270MDL1TD capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PLV1J270MDL1TD is suitable to conduct the ripple current at 2.1A. PLV1J270MDL1TD Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 63V. There are 2 terminals embeded in PLV1J270MDL1TD Capacitor. There are 340μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The dielectric materials are defined as ALUMINUM.
PLV Series
Capacitance: 27μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of PLV1J270MDL1TD Aluminum Polymer Capacitors.
Typically, PLV1J270MDL1TD is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Frequency Converters
- Server motherboards
- Decoupling Noise Filtering
- Spot Welding
- Bypassing Noise Filtering
- Audio Crossover
- Computer motherboards
- Motor Start
- Smoothing Noise Filtering
- Power Factor Correction