banner_page

PLV1K100MCL1

PLV Series 10μF 80V Aluminum Polymer Capacitors ±20% Radial, Can Through Hole Bulk


  • Manufacturer: Nichicon
  • Nocochips NO: 555-PLV1K100MCL1
  • Package: Radial, Can
  • Datasheet: -
  • Stock: 107
  • Description: PLV Series 10μF 80V Aluminum Polymer Capacitors ±20% Radial, Can Through Hole Bulk (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case Radial, Can
Dielectric Material ALUMINUM (WET)
Operating Temperature -55°C~105°C
Packaging Bulk
Published 2015
Series PLV
Size / Dimension 0.315Dia 8.00mm
Tolerance ±20%
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 2
Termination Radial
ECCN Code EAR99
Type Polymer
Terminal Finish Tin (Sn)
Applications General Purpose
HTS Code 8532.22.00
Capacitance 10μF
Voltage - Rated DC 80V
Lead Pitch 3.5052mm
ESR (Equivalent Series Resistance) 40mOhm
Polarity Polar
Lead Spacing 0.138 3.50mm
Lifetime @ Temp 3000 Hrs @ 105°C
Leakage Current 160μA
Ripple Current 1.7A
Life (Hours) 3000 hours
Ripple Current @ High Frequency 1.7A @ 100kHz
Dissipation Factor 0.12 %
Height Seated (Max) 0.354 9.00mm
RoHS Status ROHS3 Compliant

The capacitance can run at the range of 10μF.


±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to PLV series. This part is mounted in the way of Through Hole. The type of the PLV1K100MCL1 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PLV1K100MCL1 is suitable to conduct the ripple current at 1.7A. PLV1K100MCL1 Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 80V. There are 2 terminals embeded in PLV1K100MCL1 Capacitor. There are 160μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The dielectric materials are defined as ALUMINUM (WET).

PLV Series


Capacitance: 10μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C

There are great quantities of applications of PLV1K100MCL1 Aluminum Polymer Capacitors.


Typically, PLV1K100MCL1 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.

  • Bypassing Noise Filtering
  • Coupling or blocking
  • Computer motherboards
  • Lighting Ballast
  • Motor Control
  • Spot Welding
  • Audio Crossover
  • UPS Buffering
  • Power Factor Correction
  • PFC

Write a review

Note: HTML is not translated!
    Bad           Good