banner_page

PLV1K220MDL1TD

PLV Series 22μF 80V Aluminum Polymer Capacitors ±20% Radial, Can Through Hole Tape & Reel (TR)


  • Manufacturer: Nichicon
  • Nocochips NO: 555-PLV1K220MDL1TD
  • Package: Radial, Can
  • Datasheet: PDF
  • Stock: 919
  • Description: PLV Series 22μF 80V Aluminum Polymer Capacitors ±20% Radial, Can Through Hole Tape & Reel (TR) (Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case Radial, Can
Operating Temperature -55°C~105°C
Packaging Tape & Reel (TR)
Published 2009
Series PLV
Size / Dimension 0.394Dia 10.00mm
Tolerance ±20%
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Termination Radial
Type Polymer
Applications General Purpose
Capacitance 22μF
Voltage - Rated DC 80V
Lead Pitch 5.0038mm
ESR (Equivalent Series Resistance) 35mOhm
Lead Spacing 0.197 5.00mm
Lifetime @ Temp 3000 Hrs @ 105°C
Leakage Current 352μA
Ripple Current 2.3A
Life (Hours) 3000 hours
Ripple Current @ High Frequency 2.3A @ 100kHz
Dissipation Factor 0.12 %
Height Seated (Max) 0.512 13.00mm
RoHS Status ROHS3 Compliant
Factory Lead Time 1 Week

The capacitance can run at the range of 22μF.


±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Reel (TR) packaging. It belongs to PLV series. This part is mounted in the way of Through Hole. The type of the PLV1K220MDL1TD capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PLV1K220MDL1TD is suitable to conduct the ripple current at 2.3A. PLV1K220MDL1TD Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 80V. PLV1K220MDL1TD Capacitor. There are 352μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total.

PLV Series


Capacitance: 22μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Reel (TR)
Works Operating Temperature: -55°C~105°C

There are great quantities of applications of PLV1K220MDL1TD Aluminum Polymer Capacitors.


Typically, PLV1K220MDL1TD is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.

  • DC/DC, DC/AC, and AC/AC converters
  • Power Line Buffering
  • DC Buffering
  • Motor Control
  • Spot Welding
  • Signal decoupling & power bypass
  • Voltage Doubling
  • Frequency Converters
  • UPS Buffering
  • Smoothing Noise Filtering

Write a review

Note: HTML is not translated!
    Bad           Good