PLV1V151MDL1TD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Dielectric Material | ALUMINUM |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Box (TB) |
| Published | 2009 |
| Series | PLV |
| Size / Dimension | 0.394Dia 10.00mm |
| Tolerance | ±20% |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| Termination | Radial |
| ECCN Code | EAR99 |
| Type | Polymer |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| HTS Code | 8532.22.00 |
| Capacitance | 150μF |
| Voltage - Rated DC | 35V |
| Terminal Pitch | 5mm |
| Lead Pitch | 5.0038mm |
| ESR (Equivalent Series Resistance) | 26mOhm |
| Polarity | POLARIZED |
| Lead Spacing | 0.197 5.00mm |
| Lifetime @ Temp | 3000 Hrs @ 105°C |
| Leakage Current | 1.05mA |
| Ripple Current | 2.7A |
| Life (Hours) | 3000 hours |
| Ripple Current @ High Frequency | 2.7A @ 100kHz |
| Dissipation Factor | 0.12 % |
| Diameter | 10mm |
| Height | 13mm |
| Height Seated (Max) | 0.512 13.00mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
The capacitance can run at the range of 150μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to PLV series. This part is mounted in the way of Through Hole. The type of the PLV1V151MDL1TD capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PLV1V151MDL1TD is suitable to conduct the ripple current at 2.7A. PLV1V151MDL1TD Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 35V. There are 2 terminals embeded in PLV1V151MDL1TD Capacitor. There are 1.05mA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The dielectric materials are defined as ALUMINUM.
PLV Series
Capacitance: 150μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of PLV1V151MDL1TD Aluminum Polymer Capacitors.
Typically, PLV1V151MDL1TD is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Computer motherboards
- Frequency Converters
- Flashtube Ignition
- Power Line Buffering
- Signal decoupling & power bypass
- Motor Control
- Audio Crossover
- To enhance power efficiency
- Motor Start
- Coupling or blocking
