PLV2A6R8MCL1TD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Box (TB) |
| Published | 2009 |
| Series | PLV |
| Size / Dimension | 0.315Dia 8.00mm |
| Tolerance | ±20% |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Radial |
| Type | Polymer |
| Applications | General Purpose |
| Capacitance | 6.8μF |
| Voltage - Rated DC | 100V |
| Lead Pitch | 3.5052mm |
| ESR (Equivalent Series Resistance) | 45mOhm |
| Lead Spacing | 0.138 3.50mm |
| Lifetime @ Temp | 3000 Hrs @ 105°C |
| Leakage Current | 136μA |
| Ripple Current | 1.6A |
| Life (Hours) | 3000 hours |
| Ripple Current @ High Frequency | 1.6A @ 100kHz |
| Dissipation Factor | 0.12 % |
| Height Seated (Max) | 0.354 9.00mm |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 6.8μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to PLV series. This part is mounted in the way of Through Hole. The type of the PLV2A6R8MCL1TD capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PLV2A6R8MCL1TD is suitable to conduct the ripple current at 1.6A. PLV2A6R8MCL1TD Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 100V. PLV2A6R8MCL1TD Capacitor. There are 136μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total.
PLV Series
Capacitance: 6.8μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of PLV2A6R8MCL1TD Aluminum Polymer Capacitors.
Typically, PLV2A6R8MCL1TD is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Lighting Ballast
- Smoothing Noise Filtering
- Voltage Doubling
- Power Factor Correction
- Decoupling Noise Filtering
- Server motherboards
- Motor Start
- Frequency Converters
- Flashtube Ignition
- Signal decoupling & power bypass
