PLX1E820MCL1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Terminal Shape | WIRE |
| Operating Temperature | -55°C~125°C |
| Packaging | Bulk |
| Published | 2009 |
| Series | PLX |
| Size / Dimension | 0.315Dia 8.00mm |
| Tolerance | ±20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| Termination | Radial |
| ECCN Code | EAR99 |
| Type | Polymer |
| Terminal Finish | Tin (Sn) |
| Applications | General Purpose |
| HTS Code | 8532.22.00 |
| Capacitance | 82μF |
| Voltage - Rated DC | 25V |
| Lead Pitch | 3.5mm |
| ESR (Equivalent Series Resistance) | 28mOhm |
| Polarity | Polar |
| Lead Spacing | 0.138 3.50mm |
| Lead Diameter | 600 μm |
| Voltage | 25V |
| Lifetime @ Temp | 3000 Hrs @ 125°C |
| Leakage Current | 410μA |
| Ripple Current | 2A |
| Life (Hours) | 3000 hours |
| Tan Delta | 0.12 |
| Ripple Current @ High Frequency | 2A @ 100kHz |
| Diameter | 8mm |
| Height | 9mm |
| Height Seated (Max) | 0.354 9.00mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 82μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to PLX series. This part is mounted in the way of Through Hole. The type of the PLX1E820MCL1 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~125°C. Nichicon PLX1E820MCL1 is suitable to conduct the ripple current at 2A. PLX1E820MCL1 Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 25V. There are 2 terminals embeded in PLX1E820MCL1 Capacitor. There are 410μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The voltage for the part is specified as 25V volts.
PLX Series
Capacitance: 82μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~125°C
There are great quantities of applications of PLX1E820MCL1 Aluminum Polymer Capacitors.
Typically, PLX1E820MCL1 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Audio Crossover
- Lighting Ballast
- Bypassing Noise Filtering
- Motor Start
- Signal decoupling & power bypass
- To enhance power efficiency
- Smoothing Noise Filtering
- Motor Control
- Power Line Buffering
- PFC
