PM2-LF10
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Screw |
| Package / Case | 100 |
| Number of Pins | 3 |
| Housing Material | Polycarbonate |
| Operating Temperature | -10°C~55°C |
| Published | 2005 |
| Series | PM2 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 5V~24V |
| Output Configuration | NPN - Open Collector |
| Output Current | 100mA |
| Max Voltage Rating (DC) | 24V |
| Response Time | 800ns |
| Sensing Distance | 0.197 (5mm) |
| Sensing Method | Reflective, Convergent |
| Sensors/Transducers Type | LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE |
| Max Supply Voltage (DC) | 24V |
| Connection Method | Connector |
| Light Source | Infrared (880nm) |
| Min Supply Voltage (DC) | 5V |
| Measurement Range-Max | 8 mm |
| Measurement Range-Min | 2.5 mm |
| Repeatability | 0.08 |
| Height | 8.4mm |
| Length | 26mm |
| Width | 31mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Ratings | IP40 |
PM2-LF10 Overview
The temperature of the photoelectric sensor should be set to -10°C~55°C to ensure reliable performance. If these electronic components are to work, they should receive 5V~24V voltage into the circuit or system. It's ideal for photoelectric sensors to have a response time of 800ns. 3 pins must be connected for the photoelectric sensor to work. A photoelectric sensor must have a current at the output of 100mA in order to function. It is possible to apply a voltage of 24V to the photoelectric sensor in a DC circuit without damaging it. It is possible to operate this photoelectric sensor at a voltage as low as possible, for example at zero volts. Photoelectric sensors are included as a convenience in the package 100. It is recommended that the photoelectric sensors operate with a maximum voltage of 24V in a DC circuit.
PM2-LF10 Features
Sensing Distance: 0.197 (5mm)
3 pins
Response Time: 800ns
Operating Temperature: -10°C~55°C
Available in 100 package
PM2 Series
Maximal Supply Voltage (DC): 24V
Minimal Supply Voltage (DC): 5V
PM2-LF10 Applications
There are a lot of Panasonic Industrial Automation Sales PM2-LF10 Photoelectric Sensors applications.
- Luminescence sensors
- Pharmaceutical industry
- Material handling
- detect objects
- Automotive industry
- Mechanical engineering
- Automatic doors
- Zone scanners
- Counting small objects
- Contrast sensors
