PM6600TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.3W |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Frequency | 200kHz~1MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | PM6600 |
| Pin Count | 24 |
| Number of Outputs | 6 |
| Qualification Status | Not Qualified |
| Power Supplies | 12V |
| Max Supply Voltage | 28V |
| Min Supply Voltage | 4.7V |
| Power Dissipation | 2.3W |
| Output Current | 32mA |
| Voltage - Output | 36V |
| Topology | Step-Up (Boost) |
| Internal Switch(s) | Yes |
| fmax-Min | 0.21 MHz |
| Dimming | PWM |
| Number of Segments | 60 |
| Voltage - Supply (Min) | 4.7V |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PM6600TR Overview
To save board space, it uses the 24-VFQFN Exposed Pad package. LED drivers have a total of 6 outputs that are used in the design of the drivers.We are using Surface Mount as the mounting method.DC DC Regulator emerges with high efficiency and reliability.The LED driver has the capability of operating at a temperature of -40°C~85°C TA.The benefits of Backlight are considerable.In this case, the frequency is 200kHz~1MHz.It is designed to work with 24 terminations.This LED driver is configured with a base of 24 pins.In the absence of a voltage supply of at least 4.7V, undetermined failures may occur.We estimate that there are 60 segments.There is a device mounted on the Surface Mount.The base part number for this LED driver is PM6600.It is acceptable to have a maximum voltage of 28V.The voltage at the output terminal is 36V.There are 24 pins on it.In addition, a Display Drivers is assigned based on the characteristics of the object.It achieves maximum efficiency with a minimal voltage supply of 4.7V.In this case, the load can only be supplied with 32mA current.
PM6600TR Features
Available in the 24-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 200kHz~1MHz
Supply voltage of 12V
PM6600TR Applications
There are a lot of STMicroelectronics PM6600TR LED Driver ICs applications.
- Gallery lighting
- LED Lightings for Industrial Equipment
- Museum lighting
- High-end retail lighting
- White LED Backlight for portable equipment
- Street lighting
- A- lamps
- General lighting
- Panel lighting
- Linear fluorescent
