Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
MOSFET Drivers |
Max Power Dissipation |
1.4W |
Voltage - Supply |
5V~18V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
10V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
PM8834 |
Pin Count |
8 |
Output Voltage |
10V |
Max Output Current |
5A |
Nominal Supply Current |
3.5mA |
Power Dissipation |
650mW |
Output Current |
500mA |
Propagation Delay |
40 ns |
Input Type |
Non-Inverting |
Turn On Delay Time |
40 ns |
Rise Time |
75ns |
Fall Time (Typ) |
75 ns |
Rise / Fall Time (Typ) |
45ns 35ns |
Interface IC Type |
FULL BRIDGE BASED MOSFET DRIVER |
Channel Type |
Independent |
Number of Drivers |
2 |
Turn On Time |
0.04 µs |
Driven Configuration |
Low-Side |
Gate Type |
IGBT, N-Channel MOSFET |
Current - Peak Output (Source, Sink) |
4A 4A |
High Side Driver |
NO |
Logic Voltage - VIL, VIH |
0.8V 2.5V |
Turn Off Time |
0.035 µs |
Height Seated (Max) |
1.75mm |
Length |
4.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
PM8834 Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.Tube represents the package.Configuration is based on 2 drivers.Its recommended mounting way is Surface Mount.When the supply voltage is 5V~18V it is able to demonstrate its superiority.There is a gate type of IGBT, N-Channel MOSFET in this design.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Non-Inverting is used as its input type.Its configuration is based on a total of 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number PM8834.The mount method is Surface Mount.The pins are configured with 8 when designing the chip.Specification is for 10V supply voltage operation.The interface IC is referred to as FULL BRIDGE BASED MOSFET DRIVER.As a maximum, there is 5A limit to the output current.Its subcategory of MOSFET Drivers contains various useful electronic components.The board has a total of 8 component pins.Mosfet gate drivers can deliver a current of 500mA.The maximum power dissipation of 1.4W shows its maximum capability to transfer and conduct power loss without overheating.In this case, the voltage output is 10V.
PM8834 Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
Maximum power dissipation of 1.4W
PM8834 Applications
There are a lot of STMicroelectronics PM8834 gate drivers applications.
- A/D drivers
- LCD/LCoS/DLP portable and embedded pico projectors
- High-speed communications
- Multicolor LED/laser displays
- Power factor correction (PFC) circuits
- Industrial Modules
- Portable Navigation Devices
- Portable computers
- Head-up and Head mounted displays
- High frequency line drivers