PS398CSEEX
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 100Ohm |
| Max Power Dissipation | 650mW |
| Base Part Number | PS398 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 1μA |
| Power Dissipation | 650mW |
| Propagation Delay | 275 ns |
| Turn On Delay Time | 200 ns |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 3V~15V ±3V~8V |
| Turn-Off Delay Time | 125 ns |
| Max Dual Supply Voltage | 8V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 3V |
| High Level Output Current | 30mA |
| Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 50nA |
| Channel Capacitance (CS(off), CD(off)) | 3.6pF 31pF |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 2.8pC |
| Channel-to-Channel Matching (ΔRon) | 6Ohm (Max) |
| Crosstalk | -92dB @ 100kHz |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
PS398CSEEX Overview
This electronic part is conveniently packaged in 16-SOIC (0.295, 7.50mm Width), making it easy to ship abroad. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, this analog switch is mounted. Multiplexer and demultiplexer circuits have a number 8:1. A electrical component with 1 channels is capable of high-quality output. The multiplexer consists of 1 circuits. Look for analog switch ic variants by searching with PS398. It has an internal resistance of 100Ohm. Please refer to the datasheets for 16 pins functions. It is generally not recommended to supply a voltage higher than 15V to the switch device in normal circumstances. In order for the electronic part to function properly, the lowest voltage should be 3V. The switch device would be able to operate with 1μA current. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 8V. For dual power supplies, a voltage of at least 3V should be attached. It can operate from 5V operating voltages. The electrical component supports 8 inputs. An output of 1 is provided by the digital multiplexer. Suppliers offer a 16-SOIC package.
PS398CSEEX Features
1 Channels
1μA Supply Current
PS398CSEEX Applications
There are a lot of Diodes Incorporated PS398CSEEX Analog Switches & Multiplexers ICs applications.
- Avionics test equipment
- Signal routing between systems
- Microwave transmission systems
- DSLAMs
- Digital Cross-Connects
- Industrial control systems
- Fiber In The Loop (FITL)
- E1 Network Equipment
- Frame Relay Equipment
- PBX interfaces
