banner_page

PVH-10V151MG70E-R2

PVH Series 150μF 10V Aluminum Polymer Capacitors ±20% Radial, Can - SMD Surface Mount Cut Tape (CT)


  • Manufacturer: Elna America
  • Nocochips NO: 269-PVH-10V151MG70E-R2
  • Package: Radial, Can - SMD
  • Datasheet: -
  • Stock: 107
  • Description: PVH Series 150μF 10V Aluminum Polymer Capacitors ±20% Radial, Can - SMD Surface Mount Cut Tape (CT) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case Radial, Can - SMD
Surface Mount Land Size 0.331Lx0.331W 8.40mmx8.40mm
Operating Temperature -55°C~105°C
Packaging Cut Tape (CT)
Published 2012
Series PVH
Size / Dimension 0.315Dia 8.00mm
Tolerance ±20%
Part Status Discontinued
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Termination SMD/SMT
Type Polymer
Applications General Purpose
Capacitance 150μF
Voltage - Rated DC 10V
ESR (Equivalent Series Resistance) 27mOhm
Lifetime @ Temp 2000 Hrs @ 105°C
Ripple Current 2.8A
Life (Hours) 2000 hours
Ripple Current @ High Frequency 2.8A @ 100kHz
Height Seated (Max) 0.276 7.00mm
RoHS Status ROHS3 Compliant

The capacitance can run at the range of 150μF.


±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can - SMD. This capacitor is accessible in the Cut Tape (CT) packaging. It belongs to PVH series. This part is mounted in the way of Surface Mount. The type of the PVH-10V151MG70E-R2 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Elna America PVH-10V151MG70E-R2 is suitable to conduct the ripple current at 2.8A. PVH-10V151MG70E-R2 Capacitor is mounted by Surface Mount. The typical values of Voltage - Rated DC are 10V. PVH-10V151MG70E-R2 Capacitor. It has SMD/SMT terminations in total.

PVH Series


Capacitance: 150μF
Tolerance: ±20%
Package / Case: Radial, Can - SMD
Packaging: Cut Tape (CT)
Works Operating Temperature: -55°C~105°C

There are great quantities of applications of PVH-10V151MG70E-R2 Aluminum Polymer Capacitors.


Typically, PVH-10V151MG70E-R2 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.

  • Frequency Converters
  • Power Factor Correction
  • Audio Crossover
  • Flashtube Ignition
  • PFC
  • Motor Start
  • DC Link
  • Spot Welding
  • Voltage Doubling
  • Smoothing Noise Filtering

Write a review

Note: HTML is not translated!
    Bad           Good