PVH-10V331MH80E-R2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | Radial, Can - SMD |
| Surface Mount Land Size | 0.409Lx0.409W 10.40mmx10.40mm |
| Operating Temperature | -55°C~105°C |
| Packaging | Cut Tape (CT) |
| Published | 2012 |
| Series | PVH |
| Size / Dimension | 0.394Dia 10.00mm |
| Tolerance | ±20% |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| Type | Polymer |
| Applications | General Purpose |
| Capacitance | 330μF |
| Voltage - Rated DC | 10V |
| ESR (Equivalent Series Resistance) | 24mOhm |
| Polarity | Polar |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Ripple Current | 3.77A |
| Life (Hours) | 2000 hours |
| Ripple Current @ High Frequency | 3.77A @ 100kHz |
| Height Seated (Max) | 0.315 8.00mm |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 330μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can - SMD. This capacitor is accessible in the Cut Tape (CT) packaging. It belongs to PVH series. This part is mounted in the way of Surface Mount. The type of the PVH-10V331MH80E-R2 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Elna America PVH-10V331MH80E-R2 is suitable to conduct the ripple current at 3.77A. PVH-10V331MH80E-R2 Capacitor is mounted by Surface Mount. The typical values of Voltage - Rated DC are 10V. PVH-10V331MH80E-R2 Capacitor. It has SMD/SMT terminations in total.
PVH Series
Capacitance: 330μF
Tolerance: ±20%
Package / Case: Radial, Can - SMD
Packaging: Cut Tape (CT)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of PVH-10V331MH80E-R2 Aluminum Polymer Capacitors.
Typically, PVH-10V331MH80E-R2 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- DC/DC, DC/AC, and AC/AC converters
- Motor Start
- To enhance power efficiency
- Bypassing Noise Filtering
- Motor Control
- To reduce power noise & signal noise
- Spot Welding
- DC Link
- Power Factor Correction
- Lighting Ballast
