Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
Radial, Can - SMD |
Surface Mount Land Size |
0.331Lx0.331W 8.40mmx8.40mm |
Operating Temperature |
-55°C~105°C |
Packaging |
Cut Tape (CT) |
Published |
2012 |
Series |
PVH |
Size / Dimension |
0.315Dia 8.00mm |
Tolerance |
±20% |
Part Status |
Discontinued |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Termination |
SMD/SMT |
Type |
Polymer |
Applications |
General Purpose |
Capacitance |
47μF |
Voltage - Rated DC |
20V |
ESR (Equivalent Series Resistance) |
45mOhm |
Lifetime @ Temp |
2000 Hrs @ 105°C |
Ripple Current |
2A |
Life (Hours) |
2000 hours |
Ripple Current @ High Frequency |
2A @ 100kHz |
Height Seated (Max) |
0.276 7.00mm |
RoHS Status |
ROHS3 Compliant |
The capacitance can run at the range of 47μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can - SMD. This capacitor is accessible in the Cut Tape (CT) packaging. It belongs to PVH series. This part is mounted in the way of Surface Mount. The type of the PVH-20V470MG70E-R2 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Elna America PVH-20V470MG70E-R2 is suitable to conduct the ripple current at 2A. PVH-20V470MG70E-R2 Capacitor is mounted by Surface Mount. The typical values of Voltage - Rated DC are 20V. PVH-20V470MG70E-R2 Capacitor. It has SMD/SMT terminations in total.
PVH Series
Capacitance: 47μF
Tolerance: ±20%
Package / Case: Radial, Can - SMD
Packaging: Cut Tape (CT)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of PVH-20V470MG70E-R2 Aluminum Polymer Capacitors.
Typically, PVH-20V470MG70E-R2 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Computer motherboards
- Power Line Buffering
- Voltage Doubling
- Power Factor Correction
- Flashtube Ignition
- Motor Start
- Bypassing Noise Filtering
- Signal decoupling & power bypass
- DC Link
- Spot Welding