banner_page

PVM-10V121MF60E-R2

PVM Series 120μF Aluminum Polymer Capacitors ±20% Radial, Can - SMD Surface Mount Cut Tape (CT)


  • Manufacturer: Elna America
  • Nocochips NO: 269-PVM-10V121MF60E-R2
  • Package: Radial, Can - SMD
  • Datasheet: -
  • Stock: 736
  • Description: PVM Series 120μF Aluminum Polymer Capacitors ±20% Radial, Can - SMD Surface Mount Cut Tape (CT) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case Radial, Can - SMD
Surface Mount Land Size 0.260Lx0.260W 6.60mmx6.60mm
Operating Temperature -55°C~105°C
Packaging Cut Tape (CT)
Published 2006
Series PVM
Size / Dimension 0.248Dia 6.30mm
Tolerance ±20%
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Type Polymer
Applications General Purpose
Voltage - Rated 10V
Capacitance 120μF
ESR (Equivalent Series Resistance) 25mOhm
Lifetime @ Temp 2000 Hrs @ 105°C
Ripple Current 2.53A
Life (Hours) 2000 hours
Impedance 1.25Ohm
Ripple Current @ High Frequency 2.53A @ 100kHz
Height Seated (Max) 0.236 6.00mm
RoHS Status ROHS3 Compliant

The capacitance can run at the range of 120μF.


±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can - SMD. This capacitor is accessible in the Cut Tape (CT) packaging. It belongs to PVM series. This part is mounted in the way of Surface Mount. The type of the PVM-10V121MF60E-R2 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Elna America PVM-10V121MF60E-R2 is suitable to conduct the ripple current at 2.53A. PVM-10V121MF60E-R2 Capacitor is mounted by Surface Mount. PVM-10V121MF60E-R2 Capacitor. Voltage - Rated often has values of 10V.

PVM Series


Capacitance: 120μF
Tolerance: ±20%
Package / Case: Radial, Can - SMD
Packaging: Cut Tape (CT)
Works Operating Temperature: -55°C~105°C

There are great quantities of applications of PVM-10V121MF60E-R2 Aluminum Polymer Capacitors.


Typically, PVM-10V121MF60E-R2 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.

  • Coupling or blocking
  • Decoupling Noise Filtering
  • DC Buffering
  • Signal decoupling & power bypass
  • UPS Buffering
  • Smoothing Noise Filtering
  • Voltage Doubling
  • Audio Crossover
  • Flashtube Ignition
  • Motor Control

Write a review

Note: HTML is not translated!
    Bad           Good