banner_page

PVM-16V101MG70E-R2

PVM Series 100μF Aluminum Polymer Capacitors ±20% Radial, Can - SMD Surface Mount Cut Tape (CT)


  • Manufacturer: Elna America
  • Nocochips NO: 269-PVM-16V101MG70E-R2
  • Package: Radial, Can - SMD
  • Datasheet: -
  • Stock: 605
  • Description: PVM Series 100μF Aluminum Polymer Capacitors ±20% Radial, Can - SMD Surface Mount Cut Tape (CT) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case Radial, Can - SMD
Surface Mount Land Size 0.331Lx0.331W 8.40mmx8.40mm
Operating Temperature -55°C~105°C
Packaging Cut Tape (CT)
Published 2006
Series PVM
Size / Dimension 0.315Dia 8.00mm
Tolerance ±20%
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Type Polymer
Applications General Purpose
Voltage - Rated 16V
Capacitance 100μF
ESR (Equivalent Series Resistance) 24mOhm
Lifetime @ Temp 2000 Hrs @ 105°C
Ripple Current 3.01A
Life (Hours) 2000 hours
Impedance 1.15Ohm
Ripple Current @ High Frequency 3.01A @ 100kHz
Height Seated (Max) 0.276 7.00mm
RoHS Status ROHS3 Compliant

The capacitance can run at the range of 100μF.


±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can - SMD. This capacitor is accessible in the Cut Tape (CT) packaging. It belongs to PVM series. This part is mounted in the way of Surface Mount. The type of the PVM-16V101MG70E-R2 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Elna America PVM-16V101MG70E-R2 is suitable to conduct the ripple current at 3.01A. PVM-16V101MG70E-R2 Capacitor is mounted by Surface Mount. PVM-16V101MG70E-R2 Capacitor. Voltage - Rated often has values of 16V.

PVM Series


Capacitance: 100μF
Tolerance: ±20%
Package / Case: Radial, Can - SMD
Packaging: Cut Tape (CT)
Works Operating Temperature: -55°C~105°C

There are great quantities of applications of PVM-16V101MG70E-R2 Aluminum Polymer Capacitors.


Typically, PVM-16V101MG70E-R2 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.

  • Bypassing Noise Filtering
  • Motor Control
  • DC/DC, DC/AC, and AC/AC converters
  • Decoupling Noise Filtering
  • To enhance power efficiency
  • Lighting Ballast
  • Smoothing Noise Filtering
  • Computer motherboards
  • Motor Start
  • Voltage Doubling

Write a review

Note: HTML is not translated!
    Bad           Good