Q126EQ
| Parameters | |
|---|---|
| Mount | Flanges |
| Number of Pins | 4 |
| Housing Material | Thermoplastic |
| Operating Temperature | -20°C~55°C |
| Published | 2013 |
| Series | Q12 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | IEC IP67 |
| Turn On Delay Time | 120 ms |
| Response Time | 1.3ms |
| Sensing Distance | 78.740 (2m) |
| Sensing Method | Through-Beam |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector |
| Light Source | LED |
| Min Supply Voltage (DC) | 10V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP67 |
Q126EQ Overview
In order to work reliably, the photoelectric sensor should be set to -20°C~55°C. Circuits or systems that use these components should have a voltage of 10V~30V. A photoelectric sensor with a response time of 1.3ms is considered to be ideal. To make the photoelectric sensor work, you have to connect the 4 pins. The maximum voltage of 30V in DC circuit can be applied to the photoelectric sensor without damage. As low a voltage as possible, such as 0 volts, can be used for this photoelectric sensor.
Q126EQ Features
Sensing Distance: 78.740 (2m)
4 pins
Response Time: 1.3ms
Operating Temperature: -20°C~55°C
Q12 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
Turn On Delay Time: 120 ms
Q126EQ Applications
There are a lot of Banner Engineering Corporation Q126EQ Photoelectric Sensors applications.
- Measuring distance
- Entrance and gate
- Luminescence sensors
- Automatic doors
- Detecting colours
- Automotive industry
- Contrast sensors
- detect objects
- Material handling
- Passive infrared sensors
