Parameters |
Mount |
Flanges |
Number of Pins |
3 |
Housing Material |
Thermoplastic |
Operating Temperature |
-20°C~55°C |
Published |
2009 |
Series |
Q12 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Voltage - Supply |
10V~30V |
Ingress Protection |
IEC IP67 |
Output Configuration |
NPN/PNP - Dark-ON |
Cable Length |
78.74 2m |
Output Current |
50mA |
Response Time |
700μs |
Sensing Distance |
39.370 (1m) |
Wavelength |
640 nm |
Sensing Method |
Retroreflective, Polarized |
Max Supply Voltage (DC) |
30V |
Connection Method |
Cable |
Light Source |
Red LED |
Min Supply Voltage (DC) |
10V |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Ratings |
IP67 |
Q12RB6LP Overview
It's important to set the photoelectric sensor's temperature to -20°C~55°C for reliable performance. This electronic component must have a voltage of 0 in order to function in a circuit or system. The ideal response time for photoelectric sensors is 700μs. The photoelectric sensor must be connected to 3 pins in order to function properly. Photoelectric sensors need 50mA at their outputs to work. It is possible to apply a voltage of 30V to the photoelectric sensor in a DC circuit without causing damage. Low voltages, such as 10V, are possible with this photoelectric sensor.
Q12RB6LP Features
Sensing Distance: 39.370 (1m)
3 pins
Response Time: 700μs
Operating Temperature: -20°C~55°C
Q12 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
Q12RB6LP Applications
There are a lot of Banner Engineering Corporation Q12RB6LP Photoelectric Sensors applications.
- Luminescence sensors
- Material handling
- Passive infrared sensors
- Zone scanners
- Detecting colours
- Automotive industry
- Counting small objects
- Contrast sensors
- Entrance and gate
- Mechanical engineering