Q12RB6LPQ
| Parameters | |
|---|---|
| Number of Pins | 4 |
| Housing Material | Thermoplastic |
| Operating Temperature | -20°C~55°C |
| Published | 2013 |
| Series | Q12 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | IEC IP67 |
| Output Configuration | NPN/PNP - Dark-ON |
| Turn On Delay Time | 120 ms |
| Response Time | 700μs |
| Sensing Distance | 39.370 (1m) |
| Sensing Method | Retroreflective, Polarized |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector |
| Light Source | Red LED |
| Min Supply Voltage (DC) | 10V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP67 |
Q12RB6LPQ Overview
It's important to set the photoelectric sensor's temperature to -20°C~55°C for reliable performance. Into a circuit or system, these electronic components must be given 10V~30V voltage. A photoelectric sensor is considered ideal if its response time is 700μs. This photoelectric sensor can only function properly if the 4 pins are connected. Photoelectric sensors can handle voltages up to 30V in DC circuits without causing damage. Using a voltage as low as possible, such as 10V, this photoelectric sensor can operate.
Q12RB6LPQ Features
Sensing Distance: 39.370 (1m)
4 pins
Response Time: 700μs
Operating Temperature: -20°C~55°C
Q12 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
Turn On Delay Time: 120 ms
Q12RB6LPQ Applications
There are a lot of Banner Engineering Corporation Q12RB6LPQ Photoelectric Sensors applications.
- Mechanical engineering
- Zone scanners
- Logistics and materials handling
- Material handling
- Automatic doors
- detect objects
- Contrast sensors
- Checking objects on production lines or conveyors
- Passive infrared sensors
- Detecting colours
