Q12RB6RQ
| Parameters | |
|---|---|
| Mount | Flanges |
| Number of Pins | 4 |
| Housing Material | Thermoplastic |
| Operating Temperature | -20°C~55°C |
| Published | 2009 |
| Series | Q12 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | IEC IP67 |
| Output Configuration | NPN/PNP - Dark-ON |
| Turn On Delay Time | 120 ms |
| Response Time | 1.3ms |
| Sensing Distance | 78.740 (2m) |
| Sensing Method | Through-Beam |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector |
| Light Source | Red LED |
| Min Supply Voltage (DC) | 10V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP67 |
Q12RB6RQ Overview
Photoelectric sensors should be set at -20°C~55°C for reliable performance. For these electronic components to function, a voltage of 10V~30V should be applied to a circuit or system. For photoelectric sensors, 1.3ms is considered an ideal response time. 4 pins must be connected to the photoelectric sensor to make it work. In a DC circuit, you can apply a voltage of 30V without damaging the photoelectric sensor. As low a voltage as possible, such as 10V, can be used for this photoelectric sensor.
Q12RB6RQ Features
Sensing Distance: 78.740 (2m)
4 pins
Response Time: 1.3ms
Operating Temperature: -20°C~55°C
Q12 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
Turn On Delay Time: 120 ms
Q12RB6RQ Applications
There are a lot of Banner Engineering Corporation Q12RB6RQ Photoelectric Sensors applications.
- Automotive industry
- Entrance and gate
- Pharmaceutical industry
- Passive infrared sensors
- Material handling
- Measuring distance
- Automatic doors
- Luminescence sensors
- Zone scanners
- Logistics and materials handling
