Q60BB6LAF1400Q
| Parameters | |
|---|---|
| Number of Pins | 5 |
| Housing Material | Polycarbonate |
| Operating Temperature | -10°C~50°C |
| Published | 2003 |
| Series | Q60 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 6P, IEC IP67 |
| Output Configuration | NPN/PNP - Dark-ON/Light-ON |
| Output Current | 150mA |
| Response Time | 2ms |
| Adjustment Type | Adjustable |
| Sensing Distance | 39.370 (1m) |
| Sensing Method | Reflective, Background Suppression |
| Max Supply Voltage (DC) | 30V |
| Light Source | LED |
| Min Supply Voltage (DC) | 10V |
| Height | 75mm |
| Length | 25mm |
| Width | 60mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP67 |
Q60BB6LAF1400Q Overview
To make sure the photoelectric sensor works, set its temperature to zero. Circuits or systems that use these components should have a voltage of 10V~30V. The ideal response time for a photoelectric sensor is 2ms. In order to make the photoelectric sensor work properly, it must have 5 pins connected. Photoelectric sensors need an output current of 150mA in order to operate. Photoelectric sensors can withstand voltages up to 30V in DC circuits. Ideally, this photoelectric sensor should operate at a low voltage, such as 0V.
Q60BB6LAF1400Q Features
Sensing Distance: 39.370 (1m)
5 pins
Response Time: 2ms
Operating Temperature: -10°C~50°C
Q60 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
Q60BB6LAF1400Q Applications
There are a lot of Banner Engineering Corporation Q60BB6LAF1400Q Photoelectric Sensors applications.
- Monitoring bigger areas for objects with light grids
- Measuring distance
- Contrast sensors
- Passive infrared sensors
- Logistics and materials handling
- detect objects
- Entrance and gate
- Material handling
- Luminescence sensors
- Mechanical engineering
