QLX4600SIQSR
| Parameters | |
|---|---|
| Data Rate | 6.25 Gbps |
| Telecom IC Type | TELECOM CIRCUIT |
| Height Seated (Max) | 0.75mm |
| Length | 7mm |
| Width | 4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | QFN EP |
| Number of Pins | 46 |
| Published | 2009 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 46 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Other Telecom ICs |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 46 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 1.3V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 260mA |
| Nominal Supply Current | 260mA |
QLX4600SIQSR Overview
The QFN EPpackage would be a good match for it.This termination has 46terminations.Make sure that this device is set to 1.2V.There are a total of 46 pins on the device.A device's operation is controlled by the 46pins.Currently, Surface Mountis mounting it.A minimum working temperature of 0°Cis required to ensure the reliability of the device.It is imperative that the maximum value of 70°Cis maintained in order to ensure continued operation.Electronic components are of the Other Telecom ICsfamily.Interface ICs operate at a voltage level of 1.2V volts.This device is equipped with a telecom IC type of TELECOM CIRCUIT.1.3Vis the maximum voltage it can take.
QLX4600SIQSR Features
Set the part at 1.2V volts
Telecom IC Type : TELECOM CIRCUIT
QLX4600SIQSR Applications
There are a lot of Intersil (Renesas Electronics America) QLX4600SIQSR Specialized Interface ICs applications.
- Medical systems
- USB 1.1 signal switching circuits
- ?Central office or PBX (Private Branch Exchange)
- Data Acquisition Systems
- Channelized and Unchannelized DS3 applications
- Isolation
- Communications systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG,
- Sample hold systems
- Routers
