QS18VP6LPQ8
| Parameters | |
|---|---|
| Number of Pins | 4 |
| Housing Material | ABS |
| Operating Temperature | -20°C~70°C |
| Published | 2014 |
| Series | QS18 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 6P, IEC IP67 |
| Output Configuration | PNP - Dark-ON/Light-ON |
| Response Time | 600μs |
| Adjustment Type | Adjustable, Potentiometer |
| Sensing Distance | 137.795 (3.5m) |
| Sensing Method | Retroreflective, Polarized |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector |
| Light Source | Red LED |
| Min Supply Voltage (DC) | 10V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP67 |
QS18VP6LPQ8 Overview
The temperature of the photoelectric sensor should be set to -20°C~70°C to ensure reliable performance. It's important that 10V~30V is applied to the circuit or system for these components to work. A photoelectric sensor is considered ideal if its response time is 600μs. It is necessary to connect 4 pins to make the photoelectric sensor work. The maximum voltage of 30V in a DC circuit can be applied to the photoelectric sensor without causing damage. Ideally, this photoelectric sensor should operate at a low voltage, such as 0V.
QS18VP6LPQ8 Features
Sensing Distance: 137.795 (3.5m)
4 pins
Response Time: 600μs
Operating Temperature: -20°C~70°C
QS18 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
QS18VP6LPQ8 Applications
There are a lot of Banner Engineering Corporation QS18VP6LPQ8 Photoelectric Sensors applications.
- Monitoring bigger areas for objects with light grids
- Zone scanners
- Automotive industry
- Pharmaceutical industry
- Contrast sensors
- Luminescence sensors
- Measuring distance
- Logistics and materials handling
- Checking objects on production lines or conveyors
- Counting small objects
