QS18VP6R
| Parameters | |
|---|---|
| Mount | Cable, Through Hole |
| Number of Pins | 4 |
| Housing Material | ABS |
| Operating Temperature | -20°C~70°C |
| Published | 2016 |
| Series | QS18 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 6P, IEC IP67 |
| Output Configuration | PNP - Dark-ON/Light-ON |
| Cable Length | 78.74 2m |
| Output Current | 100mA |
| Contact Current Rating | 100mA |
| Response Time | 750μs |
| Sensing Distance | 787.402 (20m) |
| Sensing Method | Through-Beam |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Cable |
| Light Source | LED |
| Min Supply Voltage (DC) | 10V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP67 |
QS18VP6R Overview
It is recommended to set the temperature of a photoelectric sensor to -20°C~70°C in order to ensure reliable operation. In order for these electronic components to function, they must be connected to a circuit or system with a voltage of zero. A photoelectric sensor should have a response time of 750μs. It's important to connect 4 pins for the photoelectric sensor to work. Photoelectric sensor output current should be 100mA for it to operate. The maximum voltage of 30V in DC circuit can be applied to the photoelectric sensor without damage. Photoelectric sensors work at as low a voltage as possible, for example 10V.
QS18VP6R Features
Sensing Distance: 787.402 (20m)
4 pins
Response Time: 750μs
Operating Temperature: -20°C~70°C
QS18 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
QS18VP6R Applications
There are a lot of Banner Engineering Corporation QS18VP6R Photoelectric Sensors applications.
- Counting small objects
- Luminescence sensors
- Entrance and gate
- Logistics and materials handling
- Monitoring bigger areas for objects with light grids
- Pharmaceutical industry
- Automatic doors
- Automotive industry
- Checking objects on production lines or conveyors
- Zone scanners
