QS30DQ
| Parameters | |
|---|---|
| Number of Pins | 5 |
| Housing Material | ABS |
| Operating Temperature | -20°C~70°C |
| Published | 2016 |
| Series | QS30 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 6P, IP67 |
| Output Configuration | NPN/PNP - Dark-ON/Light-ON |
| Output Current | 100mA |
| Turn On Delay Time | 100 ms |
| Response Time | 2ms |
| Adjustment Type | Adjustable, Potentiometer |
| Sensing Distance | 39.370 (1m) |
| Sensing Method | Diffuse |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector |
| Light Source | Infrared (940nm) |
| Min Supply Voltage (DC) | 10V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP67 |
QS30DQ Overview
Photoelectric sensors should be set at -20°C~70°C for reliable performance. If these electronic components are to work, they should receive 10V~30V voltage into the circuit or system. For photoelectric sensors, 2ms is considered an ideal response time. It is necessary to connect 5 pins to make the photoelectric sensor work. In order to operate, photoelectric sensor should have a current of 100mA at the output. Photoelectric sensors can handle voltages up to 30V in DC circuits without causing damage. Low voltages, such as 10V, are possible with this photoelectric sensor.
QS30DQ Features
Sensing Distance: 39.370 (1m)
5 pins
Response Time: 2ms
Operating Temperature: -20°C~70°C
QS30 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
Turn On Delay Time: 100 ms
QS30DQ Applications
There are a lot of Banner Engineering Corporation QS30DQ Photoelectric Sensors applications.
- Entrance and gate
- Counting small objects
- Automatic doors
- Material handling
- Pharmaceutical industry
- Luminescence sensors
- Automotive industry
- Contrast sensors
- Checking objects on production lines or conveyors
- Zone scanners
