QS30E
| Parameters | |
|---|---|
| Number of Pins | 2 |
| Housing Material | ABS |
| Operating Temperature | -20°C~70°C |
| Published | 2005 |
| Series | QS30 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 6P, IP67 |
| Cable Length | 78.74 2m |
| Output Current | 100mA |
| Response Time | 5ms |
| Sensing Distance | 196.85' (60m) |
| Sensing Method | Through-Beam |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Cable |
| Light Source | Infrared (875nm) |
| Min Supply Voltage (DC) | 10V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP67 |
QS30E Overview
You should set the photoelectric sensor's temperature to -20°C~70°C for reliable performance. For these electronic components to function, a voltage of 10V~30V should be applied to a circuit or system. Photoelectric sensors should have a response time of 5ms. The 2 pins on the photoelectric sensor need to be connected for it to work. In order for a photoelectric sensor to function, the output current should be 100mA. Photoelectric sensors can be damaged by voltages up to 30V in DC circuits. Unlike most photoelectric sensors, this one operates at a very low voltage such as 0 volts.
QS30E Features
Sensing Distance: 196.85' (60m)
2 pins
Response Time: 5ms
Operating Temperature: -20°C~70°C
QS30 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
QS30E Applications
There are a lot of Banner Engineering Corporation QS30E Photoelectric Sensors applications.
- Measuring distance
- Logistics and materials handling
- Entrance and gate
- Material handling
- Mechanical engineering
- Automatic doors
- Detecting colours
- detect objects
- Passive infrared sensors
- Pharmaceutical industry
