QS30FF200Q
| Parameters | |
|---|---|
| Number of Pins | 5 |
| Housing Material | ABS |
| Operating Temperature | -20°C~70°C |
| Published | 2005 |
| Series | QS30 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 6P, IP67 |
| Output Configuration | NPN/PNP - Dark-ON/Light-ON |
| Output Current | 100mA |
| Contact Current Rating | 40mA |
| Response Time | 2ms |
| Sensing Distance | 7.874 (200mm) |
| Sensing Method | Background Suppression |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector |
| Light Source | Red (680nm) |
| Min Supply Voltage (DC) | 10V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP67 |
QS30FF200Q Overview
In order to work reliably, the photoelectric sensor should be set to -20°C~70°C. Into a circuit or system, these electronic components must be given 10V~30V voltage. The ideal response time for a photoelectric sensor is 2ms. It is necessary to connect 5 pins to make the photoelectric sensor work. A photoelectric sensor must have a current at the output of 100mA in order to function. It is possible to apply a voltage of 30V to the photoelectric sensor in a DC circuit without damaging it. Photoelectric sensors can operate at low voltages, such as 10V.
QS30FF200Q Features
Sensing Distance: 7.874 (200mm)
5 pins
Response Time: 2ms
Operating Temperature: -20°C~70°C
QS30 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
QS30FF200Q Applications
There are a lot of Banner Engineering Corporation QS30FF200Q Photoelectric Sensors applications.
- Automotive industry
- Material handling
- Zone scanners
- Monitoring bigger areas for objects with light grids
- Detecting colours
- Checking objects on production lines or conveyors
- detect objects
- Mechanical engineering
- Counting small objects
- Contrast sensors
