QS30LDLQ
| Parameters | |
|---|---|
| Number of Pins | 5 |
| Operating Temperature | -10°C~50°C |
| Published | 2004 |
| Series | QS30 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 6P, IEC IP67 |
| Output Configuration | NPN/PNP - Dark-ON/Light-ON |
| Output Current | 150mA |
| Contact Current Rating | 35mA |
| Response Time | 500μs |
| Sensing Distance | 31.496 (800mm) |
| Sensing Method | Diffuse |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector |
| Light Source | LED |
| Min Supply Voltage (DC) | 10V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP67 |
QS30LDLQ Overview
The temperature of photoelectric sensor should be set to -10°C~50°C to ensure reliable performance. In order for these electronic components to work, their voltage must be set to 10V~30V. It is generally considered that photoelectric sensors have a response time of 500μs. It's important to connect 5 pins for the photoelectric sensor to work. Whenever a photoelectric sensor is operating, the output current should be zero. DC circuit can apply a maximum voltage of 30V without harming the photoelectric sensor. As low a voltage as possible, such as 10V, can be used for this photoelectric sensor.
QS30LDLQ Features
Sensing Distance: 31.496 (800mm)
5 pins
Response Time: 500μs
Operating Temperature: -10°C~50°C
QS30 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
QS30LDLQ Applications
There are a lot of Banner Engineering Corporation QS30LDLQ Photoelectric Sensors applications.
- Passive infrared sensors
- Contrast sensors
- detect objects
- Detecting colours
- Zone scanners
- Entrance and gate
- Logistics and materials handling
- Measuring distance
- Pharmaceutical industry
- Checking objects on production lines or conveyors
