Parameters |
Number of Pins |
5 |
Housing Material |
Plastic |
Operating Temperature |
-10°C~50°C |
Published |
2004 |
Series |
QS30 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Voltage - Supply |
10V~30V |
Ingress Protection |
NEMA 6P, IEC IP67 |
Output Configuration |
NPN/PNP - Dark-ON/Light-ON |
Output Current |
150mA |
Response Time |
500μs |
Sensing Distance |
15.748 (400mm) |
Sensing Method |
Diffuse |
Max Supply Voltage (DC) |
30V |
Connection Method |
Connector |
Light Source |
LED |
Min Supply Voltage (DC) |
10V |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Ratings |
IP67 |
QS30LDQ Overview
To make sure your photoelectric sensor is reliable, set its temperature to -10°C~50°C. For these electronic components to work, the voltage should be provided by 10V~30V. A photoelectric sensor is considered ideal if its response time is 500μs. It is necessary to connect 5 pins to make the photoelectric sensor work. It is required that the output current of a photoelectric sensor be 150mA. There is a maximum voltage of 30V that can be applied to a photoelectric sensor in a DC circuit without damaging it. Photoelectric sensors can operate at low voltages, such as 10V.
QS30LDQ Features
Sensing Distance: 15.748 (400mm)
5 pins
Response Time: 500μs
Operating Temperature: -10°C~50°C
QS30 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
QS30LDQ Applications
There are a lot of Banner Engineering Corporation QS30LDQ Photoelectric Sensors applications.
- Detecting colours
- Checking objects on production lines or conveyors
- Logistics and materials handling
- Zone scanners
- Monitoring bigger areas for objects with light grids
- Contrast sensors
- Passive infrared sensors
- Material handling
- detect objects
- Pharmaceutical industry