banner_page

QS3125QG

16 Terminations16 Pin Signal switch1 FunctionsMin 4.75V VMax 5.25V V


  • Manufacturer: Integrated Device Technology (IDT)
  • Nocochips NO: 378-QS3125QG
  • Package: QSOP
  • Datasheet: PDF
  • Stock: 482
  • Description: 16 Terminations16 Pin Signal switch1 FunctionsMin 4.75V VMax 5.25V V(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Tin
Mount Surface Mount
Package / Case QSOP
Number of Pins 16
Published 2011
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1
Number of Terminations 16
ECCN Code EAR99
Resistance 15Ohm
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory Bus Driver/Transceivers
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.635mm
Pin Count 16
Operating Supply Voltage 5V
Number of Elements 4
Power Supplies 5V
Temperature Grade INDUSTRIAL
Max Supply Voltage 5.25V
Min Supply Voltage 4.75V
Power Dissipation-Max 500mW
Number of Ports 2
Nominal Supply Current 3μA
Number of Bits 4
Propagation Delay 250 ps
Quiescent Current 3μA
Turn On Delay Time 6.5 ns
Family 3125
Output Characteristics 3-STATE
Supply Type Single
Output Polarity TRUE
Logic IC Type BUS DRIVER
High Level Output Current -120mA
Low Level Output Current 120mA
Height Seated (Max) 1.7272mm
Length 4.9mm
Width 3.8mm
Thickness 1.47mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

QS3125QG Overview


It is included in the QSOP in order to save board space.As parts of its basic configuration, 16 terminations are desgined.The voltage supplied for multiplexer's system is 5V.multiplexer's systemA component pin count of 16 can be found on this turn signal switch.As the end of conductors, it uses GULL WING.As a type of supply, Single is employed.This multiplexer ic has 16 pins configured.The mounting is in the way of Surface Mount.The logic switch is a member of the family of 3125.There are 4 bits in signal multiplexer.mux switch's normal operation requires the power supply of 5V.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.Without the influence of external factors, it consumes 3μA current of multiplexer ic.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.2 is the resistance at which it operates.The system operates with a resistance of 15Ohm.The signal switch can operate at a maximum temperature of 85°C.In order to maintain a minimal operating temperature, the temperature of the multiplexer should be set to -40°C.In compliance with the applicable device specification, the signal switches has a maximum supply voltage of 5.25V.Device specifications require that the digital swith operate at a minimum supply voltage of 4.75V.In the mux switch configuration, there are 4 elements.It uses IC BUS DRIVER for its logic.

QS3125QG Features


Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC

QS3125QG Applications


There are a lot of Integrated Device Technology (IDT) QS3125QG Signal Switches / Multiplexers / Decoders applications.

  • Paper plants
  • Arithmetic Logic Units
  • RF-based home automation system
  • Steel plants
  • To select different devices in microprocessor input
  • Automatic Monitoring systems
  • Microprocessor memory systems
  • LVDS
  • Computer memory
  • PCIe

Write a review

Note: HTML is not translated!
    Bad           Good