QS3125QG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 16 |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation-Max | 500mW |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Number of Bits | 4 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6.5 ns |
| Family | 3125 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Height Seated (Max) | 1.7272mm |
| Length | 4.9mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS3125QG8 Overview
The reason it is provided is that the board space can be saved by placing digital switch in the QSOP.As parts of its basic configuration, 16 terminations are desgined.The multiplexer's system is powered by 5V volts.In this turn signal switch, there are 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Single is used as its supply type.There are 16 pins on it.The mount is in Surface Mount.In the 3125 family, the logic switch is included.In this signal multiplexer, there are 4 bits that are provided.The power supply of 5V is provided for mux switch's normal operation.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.Not being affected by the external factors, consumes 3μA current of multiplexer ic.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.A resistance of 2 governs its operation.With a resistance of 15Ohm, it operates.The signal switch can operate at a maximum temperature of 85°C.It is recommended that the minimum operating temperature of the multiplexer be kept at -40°C.Based on the device specifications, the signal switches is designed to operate at 5.25V maximum supply voltage.In accordance with the applicable device specification, the digital swith must operate at a minimum supply voltage of 4.75V.The mux switch configuration contains 4 elements.It uses the logic IC BUS DRIVER as its core logic unit.
QS3125QG8 Features
Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
QS3125QG8 Applications
There are a lot of Integrated Device Technology (IDT) QS3125QG8 Signal Switches / Multiplexers / Decoders applications.
- Code converters
- High-performance memory-decoding applications
- Metal detectors
- Recording transmission
- LVDS
- A robotic vehicle with the metal detector
- Paper plants
- Computer memory
- Speed control of medern motors
- A/D converters
