QS3125S1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation-Max | 500mW |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Number of Bits | 4 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6.5 ns |
| Family | 3125 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Height Seated (Max) | 1.75mm |
| Length | 8.6mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS3125S1G Overview
For the purpose of saving board space, digital switch is included in the SOIC.As parts of its basic configuration, 14 terminations are desgined.In this case, 5V is the voltage supplied to the multiplexer's system.A component pin count of 14 is found on this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Single is used as its supply type.A total of 14 pins are configured on this board.The mount is in Surface Mount.The 3125 family includes the logic switch.Signal multiplexer contains 4 bits.There is a power supply provided for the mux switch's normal operation of 5V.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.Not being affected by the external factors, consumes 3μA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.With a resistance of 0, it operates.This signal switching operates at a resistance of 15Ohm.In this case, operating this signal switch at 85°C is acceptable.It is recommended that a minimum operating temperature of the multiplexer of -40°C be maintained.In accordance with the applicable device specifications, the signal switches operates at a maximum supply voltage of 5.25V.Typical device specifications specify a voltage supply of 4.75V for the digital swith.A configuration element for the mux switch consists of 4 elements.For its logic, IC BUS DRIVER is used.
QS3125S1G Features
Supplied in the SOIC package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
QS3125S1G Applications
There are a lot of Integrated Device Technology (IDT) QS3125S1G Signal Switches / Multiplexers / Decoders applications.
- Data collection system
- To select different task for memory in microprocessor memory systems
- Speed control of medern motors
- Medical industry
- Data demultiplexing
- Data-routing applications
- Make full adder
- VGA
- Image transmission
- Textile mills
