QS3126QG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 16 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation-Max | 500mW |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6.5 ns |
| Family | 3126 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Height Seated (Max) | 1.72mm |
| Length | 4.9mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS3126QG Overview
This is a relatively small item of digital switch that is included in the QSOP in order to save space on the board.The basic configuration includes 16 terminations.The voltage supplied for multiplexer's system is 5V.multiplexer's systemCurrently, this turn signal switch has a total of 16 component pins.As a result, GULL WING represents the end of the conductors.In this case, the supply type is Single.It is configured with 16 pins.The mounting point is Surface Mount.The logic switch is included into the family of 3126.There are 1 bits in signal multiplexer.For mux switch's normal operation, power supply 5V is provided.Bus Driver/Transceivers is the classification for this the digital switch ic.Not being affected by the external factors, consumes 3μA current of multiplexer ic.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.A resistance of 2 is used to operate the signal switching.The resistance of the signal switching is 15Ohm.At 85°C, the maximum operating temperature of this signal switch is acceptable.A temperature of the multiplexer of -40°C should be maintained for minimal operation.It is specified that the signal switches should operate at 5.25V as its maximum supply voltage.A minimum supply voltage of 4.75V is required to operate the digital swith.The mux switch configuration contains 4 elements.In terms of logic ICs, it uses BUS DRIVER.
QS3126QG Features
Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
QS3126QG Applications
There are a lot of Integrated Device Technology (IDT) QS3126QG Signal Switches / Multiplexers / Decoders applications.
- Frequency multiplexing system
- VGA
- Analog, digital or video signal switching
- D/A converters
- Logic circuits
- Relay
- Signal router
- Steel plants
- Data distribution
- Solenoid cooling fan
