QS3126QG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 16 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 6.5 ns |
| Quiescent Current | 3μA |
| Family | 3126 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Height Seated (Max) | 1.7272mm |
| Length | 4.9mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS3126QG8 Overview
Due to the fact that it is provided in the QSOP, digital switch allows the board to be compacted.As parts of its basic configuration, 16 terminations are desgined.For multiplexer's system, 5V voltage is supplied.Signal switch has 16 component pins.It employs GULL WING as the point at which conductors come to an end.Single is employed as its supply type.The board has 16 pins configured.Multiplexer ics are mounted in the direction of Surface Mount.There is a family of 3126 members.In this signal multiplexer, there are 1 bits provided.For mux switch's normal operation, there is a power supply provided at 5V.This is a signal switch that is categorized as Bus Driver/Transceivers.Without external influences, it consumes 3μA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.The resistance of the signal switching is 2.In this case, operating this signal switch at 85°C is acceptable.Temperatures of the multiplexer should be kept at -40°C.The signal switches is specified to operate at the maximum supply voltage of 5.25V in compliance with the applicable device specification.A minimum supply voltage of 4.75V is required to operate the digital swith.In mux switch configuration, there are 4 elements.The logic IC of the digitalswitch is BUS DRIVER.
QS3126QG8 Features
Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
QS3126QG8 Applications
There are a lot of Integrated Device Technology (IDT) QS3126QG8 Signal Switches / Multiplexers / Decoders applications.
- D/A converters
- Audio transmission
- A/D converters
- Code converters
- War field flying robot with a night vision flying camera
- Frequency multiplexing system
- VGA
- Relay
- Transmission from the computer system of a satellite
- RF-based home automation system
