QS3126S1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation-Max | 500mW |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6.5 ns |
| Family | 3126 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Height Seated (Max) | 1.7272mm |
| Length | 8.6mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS3126S1G Overview
It is included in the SOIC in order to save board space.Among its basic configurations are 14 terminations.The turn signal switch is supplied with a voltage of 5V volts.A component pin count of 14 is found on this turn signal switch.As the end of conductors, it uses GULL WING.This supply type employs Single.A total of 14 pins are configured on this board.It is positioned in the direction of Surface Mount.The logic switch is a member of the family of 3126.There are 1 bits signal multiplexer provides.For mux switch's normal operation, there is a power supply provided at 5V.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.There are no external influences on this multiplexer ic, so it consumes 3μA current.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The system operates with a resistance of 2.A resistance of 15Ohm is used to operate it.85°C is an acceptable maximum temperature for this signal switch.It is recommended that the minimal operating temperature of the multiplexer be maintained at -40°C.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 5.25V.Device specifications require that the digital swith operate at a minimum supply voltage of 4.75V.The configuration of the mux switch contains 4 elements.BUS DRIVER is the logic integrated circuit used in the digitalswitch.
QS3126S1G Features
Supplied in the SOIC package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
QS3126S1G Applications
There are a lot of Integrated Device Technology (IDT) QS3126S1G Signal Switches / Multiplexers / Decoders applications.
- Data collection system
- Data-routing applications
- D/A converters
- Injectors
- Data transfer
- Medical industry
- Combinational circuit
- Enabling different rows of memory depending on address in memory chips
- Communication system
- Logic circuits
