QS32245QG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 40Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TTL COMPATIBLE BUS SWITCH |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation-Max | 500mW |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Number of Bits | 8 |
| Propagation Delay | 1.25 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6.6 ns |
| Family | 32245 |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Independent Circuits | 1 |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS32245QG Overview
It is included in the QSOP in order to save board space.The basic configuration of this system includes 20 terminations.In this case, 5V is the voltage supplied to the multiplexer's system.Signal switch has 20 component pins.It is the end of conductors that is represented by GULL WING.The supply type of this multiplexer ic is Single.This multiplexer ic is configured with 20 pins.It is mounted in the way of Surface Mount.The logic switch belongs to the family of 32245.As a result, signal multiplexer provides a total of 8 bits.For mux switch's normal operation, there is a power supply provided at 5V.The part belongs to the Bus Driver/Transceivers category of signal switches.There are no external influences on this multiplexer ic, so it consumes 3μA current.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The system operates with a resistance of 2.With a resistance of 40Ohm, it operates.85°C is an acceptable maximum temperature for this signal switch.In order to maintain a minimal operating temperature, the temperature of the multiplexer should be set to -40°C.The signal switches is specified to operate at the maximum supply voltage of 5.25V in compliance with the applicable device specification.The digital swith is specified to operate at the minimum supply voltage of 4.75V in compliance with the applicable device specification.Additionally, TTL COMPATIBLE BUS SWITCH has improved characteristics.For its logic, IC BUS DRIVER is used.
QS32245QG Features
Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
TTL COMPATIBLE BUS SWITCH
BUS DRIVER as the logic IC
QS32245QG Applications
There are a lot of Integrated Device Technology (IDT) QS32245QG Signal Switches / Multiplexers / Decoders applications.
- Code converters
- Automatic health monitoring systems
- Video transmission
- Combinational circuit
- Analog, digital or video signal switching
- Enabling block of memory depending on address in memory chips
- Electronics industry
- HD surveillance system
- Night vision cameras
- Enabling different rows of memory depending on address in memory chips
