QS32390QG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 28 |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 8 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation | 500mW |
| Propagation Delay | 1.25 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 7.5 ns |
| Family | 32390 |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Number of Input Lines | 16 |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Length | 9.9mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS32390QG Overview
It is included in the QSOP in order to save board space.The basic configuration of this system includes 28 terminations.The multiplexer's system works with 5V voltage.This turn signal switch consists of 28 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.As a type of supply, Single is employed.Currently, it is configured with 28 pins.This unit is mounted in the way of Surface Mount.In the 32390 family, the logic switch is included.In order for 5V to operate normally, a power supply is provided.In electronic terms, the digital switch ic is classified as Other Logic ICs.Without the influence of external factors, it consumes 3μA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.For the purpose of accepting voltage levels, the multiplexers have 16 input lines.A signal source is provided by 8 output lines.Signal switch operation at 85°C temperature is acceptable.Maintaining a minimum operating temperature of the multiplexer of -40°C is recommended.The device is specified to operate at the maximum supply voltage of 5.25V in accordance with its applicable specification.A minimum supply voltage of 4.75V is required to operate the digital swith.
QS32390QG Features
Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
16 input lines
8 output lines
QS32390QG Applications
There are a lot of Integrated Device Technology (IDT) QS32390QG Signal Switches / Multiplexers / Decoders applications.
- Make full adder
- Automatic health monitoring systems
- Microprocessor input/output systems
- Logic gates for other digital devices
- Night vision cameras
- VGA
- Implementing boolean functions with multiple variables
- Memory chips
- HDMI applications
- Signal router
