QS3244PAG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 12Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation-Max | 500mW |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Number of Bits | 8 |
| Propagation Delay | 5.6 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.6 ns |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Turn-Off Delay Time | 5.2 ns |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Independent Circuits | 2 |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS3244PAG Overview
This is a relatively small item of digital switch that is included in the TSSOP in order to save space on the board.Among its basic features are 20 terminations.In multiplexer's system, 5V is the voltage supplied.Signal switch has 20 component pins.A conductor terminates at GULL WING.In this case, the supply type is Single.It is configured with 20 pins.Surface Mount is the way it is mounted.As a result, signal multiplexer provides 8 bits.A power supply is provided for mux switch's normal operation of 5V.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.Without any external influences, it consumes 3μA current of multiplexer ic at all times.Using a supply voltage of 5V can result in reliable performance of the multiplexers.A resistance of 2 is used to operate the signal switching.In terms of resistance, it has a value of 12Ohm.The signal switch can operate at a maximum temperature of 85°C.In order to maintain a minimal operating temperature, the temperature of the multiplexer should be set to -40°C.The device is specified to operate at a maximum supply voltage of 5.25V in accordance with the applicable device specification.A minimum supply voltage of 4.75V is specified for the digital swith by its applicable specification.BUS DRIVER is the logic integrated circuit used in the digitalswitch.
QS3244PAG Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
QS3244PAG Applications
There are a lot of Integrated Device Technology (IDT) QS3244PAG Signal Switches / Multiplexers / Decoders applications.
- Microprocessor instruction decoding
- Textile mills
- Home automation system
- Medium scale TV wall
- Speed control of medern motors
- Paper plants
- Code conversion
- Telephone network
- Seven segment displays
- Steel plants
