banner_page

QS3244PAG8

20 Terminations20 Pin Signal switch2 FunctionsMin 4.75V VMax 5.25V V


  • Manufacturer: Integrated Device Technology (IDT)
  • Nocochips NO: 378-QS3244PAG8
  • Package: TSSOP
  • Datasheet: PDF
  • Stock: 131
  • Description: 20 Terminations20 Pin Signal switch2 FunctionsMin 4.75V VMax 5.25V V(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Package / Case TSSOP
Number of Pins 20
Published 2006
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1
Number of Terminations 20
ECCN Code EAR99
Resistance 12Ohm
Terminal Finish Matte Tin (Sn) - annealed
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory Bus Driver/Transceivers
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Pin Count 20
Qualification Status Not Qualified
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade INDUSTRIAL
Max Supply Voltage 5.25V
Min Supply Voltage 4.75V
Power Dissipation-Max 500mW
Number of Ports 2
Nominal Supply Current 2.5mA
Number of Bits 8
Propagation Delay 250 ps
Quiescent Current 3μA
Turn On Delay Time 5.6 ns
Output Characteristics 3-STATE
Supply Type Single
Turn-Off Delay Time 5.2 ns
Output Polarity TRUE
Logic IC Type BUS DRIVER
High Level Output Current -120mA
Low Level Output Current 120mA
Independent Circuits 2
Length 6.5mm
Width 4.4mm
Thickness 1mm
RoHS Status RoHS Compliant
Lead Free Lead Free

QS3244PAG8 Overview


Due to the fact that it is provided in the TSSOP, digital switch allows the board to be compacted.Among its basic features are 20 terminations.The multiplexer's system is supplied with a voltage of 5V.There are 20 component pins in this turn signal switch.A conductor terminates at GULL WING.Single is employed as its supply type.A total of 20 pins are configured on this board.The multiplexer ic is mounted in the direction of Surface Mount.In this signal multiplexer, there are 8 bits that are provided.For mux switch's normal operation, power supply 5V is provided.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.Not being affected by the external factors, consumes 3μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.2 ports are used for some other peripheral signal switchings to plug in.12Ohm is the resistance at which it operates.A maximum temperature of 85°C is acceptable for this signal switch.Temperatures of the multiplexer should be kept at -40°C.The device is specified to operate at a maximum supply voltage of 5.25V in accordance with the applicable device specification.A minimum supply voltage of 4.75V is required to operate the digital swith.The logic IC of the digitalswitch is BUS DRIVER.

QS3244PAG8 Features


Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC

QS3244PAG8 Applications


There are a lot of Integrated Device Technology (IDT) QS3244PAG8 Signal Switches / Multiplexers / Decoders applications.

  • Electronic circuits
  • Logic gates for other digital devices
  • To select different devices in microprocessor output
  • Make full adder
  • GLAN
  • Control unit of Central Processing unit (CPU)
  • Image transmission
  • War field flying robot with a night vision flying camera
  • Logic circuits
  • Speed control of medern motors

Write a review

Note: HTML is not translated!
    Bad           Good