QS3244QG
| Parameters | |
|---|---|
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 12Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation-Max | 500mW |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Number of Bits | 8 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.6 ns |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Independent Circuits | 2 |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 20 |
QS3244QG Overview
For the purpose of saving board space, digital switch is included in the QSOP.It is designed with 20 terminations as part of its basic configuration.The multiplexer's system is supplied with a voltage of 5V.Currently, this turn signal switch has a total of 20 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a type of supply of Single.With 20 pins, it is configured.This unit is mounted in the way of Surface Mount.Signal multiplexer provides 8 bits.There is a power supply provided for the mux switch's normal operation of 5V.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.It consumes 3μA current of multiplexer ic without external influences.The performance of the multiplexers can be reliably maintained at a voltage of 5V.The system operates with a resistance of 2.12Ohm is the resistance at which it operates.The signal switch can operate at a maximum temperature of 85°C.The minimal operating temperature of the multiplexer should be maintained at -40°C.In compliance with the applicable device specification, the signal switches has a maximum supply voltage of 5.25V.A minimum supply voltage of 4.75V is required to operate the digital swith.In terms of logic ICs, it uses BUS DRIVER.
QS3244QG Features
Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
QS3244QG Applications
There are a lot of Integrated Device Technology (IDT) QS3244QG Signal Switches / Multiplexers / Decoders applications.
- Recording transmission
- Decimal decoder
- Data demultiplexing
- Used to connect a single source to multiple destinations
- Speed synchronization of multiple motors in industries
- Logic gates for other digital devices
- PCIe
- CPU memory location identification
- Encrypted communications system
- To select different devices in microprocessor input
